Elite Fitness CHALLENGER Page 2 Assembly Manual Download

Page: 2 / 32

CONTENTS

Important Safety Instructions

Product Specifications

Assembly Instructions

User Instructions

Care and Maintenance

Maintenance Log

Limited Warranty

Warm-Up Exercise

Training Stages

Parts List

Exploded Drawing

Notes

Thank you for purchasing the

Elite Challenger Elliptical.

For over 20 years, Elite Fitness™ has been New Zealand’s largest supplier of fitness equipment. Our

aim and vision is to provide you Elite™ branded products, tested to the highest standard for quality

and biomechanics at the best possible price.
Please read through this manual to familiarise yourself with the operation of your new

Elite

Challenger Elliptical.

Doing so will help to insure that you get the most out of your machine,

enjoying a safe and effective workouts ahead.
Even though we go to great efforts to ensure the quality of each product we produce, occasional

errors and or omissions do occur. In any event should you find this product to have either a

defective or a missing part, please contact us for a replacement.

SERVICE & WARRANTY

For service and warranty assistance please visit:

www.elitefitness.co.nz/service

Online forms are available for Service, Warranty and Parts requests.

(09) 258 9067

Elite Fitness HQ

11 George Bourke Drive

Mt Wellington

Auckland, New Zealand

[email protected]

0800 2 438 348

Summary of Contents for CHALLENGER

































Search results

Summary of Contents for CHALLENGER

Reviews:

Related manuals for CHALLENGER

Brands by name

Popular brands

Elite Fitness CHALLENGER, Assembly Manual

Search results

Summary of Contents for CHALLENGER

Reviews:

Related manuals for CHALLENGER

Brands by name

Popular brands