manualshive.com logo in svg

Elite Fitness CHALLENGER, Assembly Manual

Share
Download
Elite Fitness CHALLENGER Assembly Manual Download Page 8

8

ASSEMBLY INSTRUCTIONS

STEP 4 

Please note:

 Lubricate wheel axle and upper arm axle using a multi purpose grease. Refer to red 

circles on diagram above.

 

—

Attach the top end of the Right Pedal Arm (#51) to the Crank Arm Axle (#43) on the right hand 

side of the wheel on the Main Frame (#34) using 1 x M8x20 Bolt (#25), 1 x Wave Washer (#7), 1 

x Flat Washer (#24) and 1 x Wave Washer (#36). Refer to Fig 4.1. 

 

—

Attach the top end of the Left Pedal Arm (#113) to the Crank Arm Axle (#43) on the left hand 

side of the wheel on the Main Frame (#34) using 1 x M8x20 Bolt (#25), 1 x Wave Washer (#7), 1 

x Flat Washer (#24) and 1 x Wave Washer (#36). Refer to Fig 4.2. 

 

—

Attach the bottom end of the Right Pedal Arm (#51)  to the right hand side Rail (#84) Between 

the Middle and Rear Stabiliser (#85).

 

—

Attach the bottom end of the Left Pedal Arm (#113) to the left hand side Rail (#84) Between 

the Middle (#80) and Rear Stabiliser (#85).

4.1

4.2

Summary of Contents for CHALLENGER

































Reviews:

No comments

Brands by name

Popular brands

Load more brands