C O N N E C T I N G T H E C H A I N
13
FRONT INSTALLATION
Weld front bracket with gate in open position.
Weld rear bracket with gate in closed position.
17.5"
2"
Cut the chain access slot on the one side
of the cover to the exact specifications.
Important:
For safe operation of the gate
opener do not cut the slots any wider or
longer than shown.
DO NOT
modify the
housing in any way other than specified.
REAR INSTALLATION – COVER MODIFICATION
Make sure the idler wheel has a safety cover.
Cut the cover 17 1/2 inches high.
(See below)
