elit
1068 nettverkstester og linjesøker
Cable Testing
& Never use the Cable Testing features on a live
circuits.
The equipment is designed to test the following cables.
Network cables: IEE 10Base-T, EIA/TIA568A, EIA/
EIA568B,
AT& T258A, Token Ring
Phone Lines : Both 2 and 4 lines
Any metallic connection cables
1) Connect the testing cable with the transmitter and
receiver.
2) Switch on the transmitter.
3) Push the TEST button and the OHM indicator will
switch on , the
SCAN indicator flashing.
4) The result of measurement is indicated over the
status of green
LEDs al both devices.
Note: Press FAST or SLOW button to adjust the
Verifying speed
Cable Testing
ffi Never use the Cable Testing features on a live circuits.
1) Connect the testing cable with the transmitter.
2) Switch on the transmitter.
3) Push the V button and the VOLT indicator will switch
on to
indicate the transmitter is standby.
4) If voltage is present in the testing cable, either the
SCAN or
OHM indicator will switch on.
Note: only model A has this feature.