Ground Burial Low Voltage Cable
has 2 cores and colour-coded rubber conductor sheathing
within a tough but flexible outer black rubber sheath designed for outdoor use.
T9910
4mm² 2
core cable is intended for installation where longer cables to higher power uplights are
required to overcome volt drop. Use
T9963
cable splice kit incorporating yellow crimps for
4mm² cable applications. 2.5mm² is the standard cable for most 12v halogen installations
where long cable runs are not involved. 1.5mm² is the standard cable for most low power 12v
l.e.d. installations.
See the Help Page for advice on cable runs!
T9910
4mm² 2 core - (50m)
T9911
4mm² 2 core - (25m)
T9912
2.5mm² 2 core (50m)
T9913
2.5mm² 2 core (25m) - pack for small jobs!
T9918
1.5mm² 2 core (50m)
T9919
1.5mm² 2 core (25m) - pack for small jobs!
T9951
Black clip for ground burial cable fits 1.5mm² & 2.5mm² cable (Box 100)
IP66 black weatherproof junction boxes c/w terminals:
3 sizes feature membrane cable
entries - just puncture the membrane & push the cable through! The large box has 20mm,
25mm & 32mm threaded cable entries. Each has a terminal strip for multiple connections.
T9810
75 x 75 x 50mm: membrane entries for glandless cabling
T9811
85 x 85 x 50mm: membrane entries for glandless cabling & 20mm entries
T9812
110 x 110 x 65mm: membrane entries for glandless cabling & 25mm entries
with 2 x 20mm adaptors
T9813
140 x 140 x 80mm: 20mm, 25mm & 32mm threaded knock-out gland entries
IP65-rated black weatherproof junction boxes (plain sides) -
plain sided boxes can be
drilled for the number and type of cable glands required for individual installations
T9801
112 x 112 x 67mm - 2x20mm glands each side
T9802
160 x 120 x 71mm - typically 3 x 2 20mm gland entries
T9803
165 x 145 x 84mm - larger box for multiple entries
T9972
20mm IP68 stuffing gland c/w lock nut for 1.5/2.5mm² 2 core
ground burial low voltage ca
>
T9973
25mm IP68 stuffing gland c/w lock nut for 4.0mm² ca
< T9599
stainless steel 450mm transformer mounting stakes to
mount a transformer or junction box in a border or independently of
a fence or wall. (supplied as a pair)
Cable Joint Kit connects a light to a 1.5/2.5mm²
2 core
ground burial low voltage ca
1
e
eating shrinks the tube by a ratio of 4:1 and melts an
internal adhesive coating which seals inside the tube to provide a
weatherproof joint.
T9962
may be used for splicing several thin
cables of low power led lights into a 1.5mm² ground burial cable
from a transformer; otherwise use T9963 cable splice kit
T9963
Cable splice kit connects
a light into a run
of 1.5mm² or 2.5mm² 2 core ground burial cable and connects a
light to the end of a 4mm² 2 core ground burial low voltage cable.
1
n
>
T9964
12/3mm adhesive-lined heat shrink tube - 1 m length
T9965
19/6mm adhesive-lined heat shrink tube - 1m length
T9968
Ground burial resin sealant pack 450gm - for potting
connections into a transformer or junction box.
T9969
Underground joint kit comprising
T9968
sealant pack &
T9801
112mm x 112mm junction box (excludes glands)
>
< T9990
black sealant is a high-performance exterior sealant
proven for outdoor applications with materials to which ordinary
silicon sealants do not bond: use it for sealing screw holes, back
plates, unglanded cable entries, knuckle joints, grommets etc.
(75ml tube)
ble up to 10mm overall diameter
ble
>
ble up to 10mm overall diameter from a
transformer. Most 12v lights except wall spotlights have an input
cable for connection this way.
T9962
comprises 2 lengths of
2/3mm adhesive-lined heat shrink tub and 2 blue crimp butt
connectors. H
an input cable of
T9963
comprises one length of 9/6mm adhesive-lined heat
shrink tube a d 2 yellow crimp butt connectors.
T9962
T9599
T9963
T9962
T9969
T9990
T9972
T9801
T9802
T9803
T9810
T9811
T9812
T9813
T9806 T9805
Installation materials
43
