Navigator Eye
32
Navigator Eye
is an energy-efficient, miniature
recessed eyelid steplight - part of the Navigator family
of l.e.d. lights - in 316 stainless steel, natural copper or
fine sandblasted brass. They feature long-life 1w white
or warm white l.e.d’s sealed in waterproof resin, frosted
glass lens, polycarbonate case and 1m rubber cable. A
spring mount locates in a sleeve for mounting in walls,
or in a hole drilled in decking or sleepers using standard
drill sizes.
48
44
Recess
Sleeve
55
70
Spring clip
fits cutout
44mm
16
16
19
S a n d b l a s t e d b r a s s
weathers to an ochre
colour to tone with wood,
buff brick or sandstone
White led
IP67
12v
LED
Spring
mount
locates
light in
recess
sleeve
or pre-
drilled
hole in
decking,
sleepers
etc.
Power consumption: 2w.
Navigators
should
be connected to
a
j
t k -
T9962
Cable Joint Kit (for connecting to the end of a cable) or
2
2
1.5mm or 2.5mm ground burial low voltage cable with heat-
shrink crimped-connector weatherproof oin
it
T9963
Cable
Splice Kit (for connecting into a run of cable).
Navigators
should be powered by 12v dc power supply. Do not use an electronic
transformer to power Navigator led lights. If powering from a 12v 20va, 40va or 60va ac wire-wound transformer, ensure
transformer is loaded to at least 75% of nominal rating
E3411W-N
Stainless steel
1 x 1w white led
E3421W
Copper
1 x 1w white led
E3461W
Textured Brass 1 x 1w white led
E3411WW
Stainless steel
1x1w warm white led
E3421WW
Copper
1x1w warm white led
E3461WW
Textured Brass 1x1w warm white led
Recessed l.e.d. eyelid steplights
Energy rating
A
A
27