Reversing camera installation
1.
Connect the reversing camera to the car number plate and
adjust the angle of the lens.
2.
Connect the red wire to the positive of the reversing light (the
reversing image will show on the screen automatically when the
car is on reverse).
3.
Connect the black wire to the negative of the reversing light.
4.
Connect the video cable to the “Reversing camera input” of the
dash cam (this will feed the video image from the camera to the
dash cam, and also provide power to the camera when the car
is on forward gear).
5.
In the reverse image state, use the [Up] / [Down] keys to
adjust the position of the reference line. After that, the
adjustment will be saved.
3. Features
1. Use automatic recording function
Start the car engine. The recorder automatically starts to open the
recording function, the charge indicator lights and video light is
blinking. After switching off the engine, the recorder automatically
saves the contents of the recorded video and shut down.
Recorded video segment is stored in the TF card. When the
memory is full, the recorder will overwrite the earlier recorded
image.
Note:
a.
Recording time cycle can be selected in the menu settings
ranges from 1 minute / 3 minutes / 5 minutes / OFF four cycles.
Summary of Contents for DCDUAL
Page 1: ...DCDUAL USER MANUAL ...
