EN
11
User Manual
Quadra Hybrid offers many new individual programmable features. This chapter shows how to access and
customise the exciting new options. All functions are accessible with the following touch buttons:
1.
Switch the Quadra Hybrid OFF.
2.
Press power up and down buttons together at the same time and switch the unit ON again by pressing
the two buttons.
3.
Release the buttons soon the unit is switched on.
4.
Done, the unit is back to standard settings.
Menu:
Press this button multiple times to select the function you want to setup.
Sub Menu:
Press this button to access preselected functions and further sub functions.
Power UP:
Select higher values.
Power Down:
Select lower values.
If after 2-5 seconds no other settings have been applied the unit returns to standard mode and the display
shows the flash power setting. All changes applied changes are stored automatically.
pHoTocell / elincHroM eye-cell (c/cp)
•
OFF / ON / EYE-CELL
•
Eye-Cell Setup
•
Eye-Cell Pre-Flash Time Frame settings
•
Eye-Cell Pre-Flash Block Time settings
inTegraTed wireless sysTeM / el-skyporT
Transceiver (r)
•
OFF / ON
•
Group 1-4 settings
•
Frequency Channel 1-8 settings
cHarge ready beep (a)
•
OFF / ON
•
Charge Ready Beep -On- timer settings
slow cHarge (sl)
•
OFF / ON
aUTo-off fUncTion (ao)
•
OFF / ON
Flash Power Display (dJ)
•
Displays the flash power in Ws or in
f-stop Elinchrom format.
LED-Pilotlight Shut Down Setting (L)
•
Programmable Pilotlight Shut Down-
settings
Flash Power Steps Per Push (i)
•
Change flash power in 1/10th – 5/10th
or 1 f-stop steps
Menu Auto Return (Ar)
•
Programmable delay time until the
unit returns from the“Menu” mode to
normal “Flash Power Display“ mode. All
programmed features are automatically
stored
ReSet to mANUFACtUReRS deFAUlt SettiNgS:
QUAdRA HyBRid BASiC-meNUS
MenU fUncTions
