Trigger Modes
The EL-Skyport
Transmitter
can trigger EL-Skyport
Receiver
modules
in the following modes:
1.
Off
è
Unit is OFF
2. Select Grp - Group(1 to 4)
è
Set switch to
Grp.
and select Group 1 to 4
è
All corresponding EL-Skyport
Receivers
with the
same
selected Group (1 to 4)
are triggered
3. ALL
è
Mode switch is set to ALL
è
All corresponding EL-Skyport Receivers are triggered regardless of which
Group
is selected.
Integrated SYNC Socket
The integrated 2.5mm Mono Jack socket is for direct connection to the camera or lens
Elinchrom RX Features
If the EL-Skyport Transmitter is used with the latest
EL-Skyport Transceivers RX
, the
following
EXTRA
features are available:
Depending upon which
Group
is selected, The following RX-unit settings can be applied:
1.
Power increase in 1/10 f-stops
è
press push button
+
to
increase
the
power
of selected Group (or ALL) RX-units
in 1/10 f-stops
2.
Power decrease in 1/10 f-stops
è
press push button - to
reduce
the
power
of selected Group of (or ALL) RX-units
in 1/10 f-stops
3.
Modelling lamp toggle
è
press and hold the push longer than 2 seconds before release,
to
toggle modelling lamp
of the selected Group of (or ALL) RX-units.
Frequency Channel
Note:
Transmitter and the corresponding
Transceivers RX
or
Universal Receivers
must have
the same frequency channel setting !
Fig. 2
Flexible swivel
Antenna 360 ̊
Flash Test
RX feature button
Power increase
OR modelling lamp
toggle
RX feature button
Power decrease
Frequency
channel selector
MODE switch
GROUP switch
Frequency
Channel
Slide Button configuration
Frequency
/ Mhz
1
2
3
1 (default)
Off
Off
Off
2456
2
On
Off
Off
2458
3
Off
On
Off
2460
4
On
On
Off
2462
5
Off
Off
On
2469
6
On
Off
On
2471
7
Off
On
On
2473
8
On
On
On
2475
Note:
After setting, switch Transmitter
OFF and ON
again to activate the new frequency channel change.
4
5
