Hot-shoe with
SYNC socket
Battery drawer
(19373)
Battery (19373)
Minus pole on top
Flexible swivel
Antenna 360 ̊
Fig. 1
Battery Installation
1. Pull the battery drawer out carefully
2. Place the Lithium battery, see
Fig. 1
for polarity
3. Close the battery drawer
! CAUTION:
• Ensure correct polarity / minus pole on top
• Use original Elinchrom Lithium Battery only (CR2430 3.0V
19372
)
• Remove battery if the EL-Skyport Transmitter is not to be used for some time
• Never short-circuit battery poles
Hot-shoe connector
The standard Hot-shoe connector with middle contact synchronisation is designed for all
digital and analogue cameras with maximum sync output of 3V
(The middle contact is the positive pole).
Operating Instructions
EL-Skyport
Transmitter
19351
Operating instructions :
2.4 GHz digital wireless
Flash Trigger Transmitter
Features
EL-Skyport flash trigger is designed with the
latest 2.4 GHz
Digital Wireless Technology
.
• Up to 1/1000s shutter speed
• 5 selectable trigger modes
• 8 frequency channels
• 40 Bit security encryption
• Up to 50 m range indoors
• Up to 120 m range outdoors
• Battery life up to 3 Months
• RX-feature buttons (Remote Control)
• Test trigger button
• Integrated Hot-shoe (middle contact)
• SYNC-socket for direct connection
You will appreciate the convenience of this professional, and powerful wireless device.
Note:
Shutter speed and distance range is influenced by reflections (from ceilings, walls, floor,
furniture and
other equipment) and interference from other 2.4 GHz electronic equipment. For best performance the
Transmitter and Receiver antenna should have direct sight, without any walls or objects in between.
2
3
