Understanding your controller
POWER ASSISTED BICYCLES
Your Module Controller has many functions and is relatively simple to use, to the leftis
listed the the buttons and their functions.
Press to switch ON/OFF
Press
to
increase
assist
level
0
-
3
.
Press to reduce assist
level
3
-
0
.
Fig.11
6
Your Controller is ÿtted to the left side of the Handlebar.
1.
ON/OFF button - Switch on after you have switched battery switch to ‘ON’
2.
Lever
buttons -
1
,
2
and
3
, easy selection levels of assistance
3.
Battery
Indicator lights - These are red and go down as you use the power.
4.
As you ride up a hill the power indicator drops down showing increased
resistance levels, but once back to level ground the indic
a
tor lights will
return to a more accurate position of available power levels.
5.
This bike has a 6km walking mode function, which allows you to push
your bike effortless
ly over steep ridges or hills. You can activate this
function by holding down the minus button for 3 seconds.