Pre-Ride Checks
Complete these checks before every ride
POWER ASSISTED BICYCLES
1.
Check to make sure all nuts/fastenings are tight
2.
Check that your tyres are inflated sufficiently (see tyre wall )
3.
Check that the brakes are working correctly. (These are set by thefactory
and should not require adjusting).
4.
Check your battery for charge.
(Note: Your new e.life battery is supplied with a partial charge)
Getting Started
Fig.9
The Battery charge level is shown
on the Control module on your
handlebar.
Fig.10
Switch the battery on with the button under the battery.
(Fig.12)
1.
Press top button on the Controller on your handlebars
(Fig.11)
2.
‘MODE’is set on‘1’ - This is a default setting.
THAT‘S IT
........You’re ready to go.
3.
To start , simply begin to pedal. Once the crank is turning you will feel
the motor kick-in and the electric system begin to assist you.
4.
You have 4 levels of assist and its a good idea to try all levels to give youa
feel of the effect this has on your riding.
(Fig.11)
5.
Remember, stopping pedaling or braking cuts the motor assist, so youcan
always feel safely in total control.
Applying the brakes activates the brake sensorwhich
cuts the power to the motor.
5