66
English
11.5. Maintenance after every 25 hours of operation
11.5.1. General lubrication treatment
To keep the machine in top condition and maintain the optimal performance it is essential to re-
gularly lubricate the machine. ELIET recommends lubricating the machine and checking surfaces
subject to friction/wear (periodicity of approx. 25 hrs).
Machines parts requiring lubrication:
I. Friction areas
1. Nylon guide for the blade holder (2x)
2. Contact surface between the side wall and the mobile scale bar for the work depth-
setting (2x)
3. Sloping surface on scale bar for the work depth which suppresses locking pin (2x)
4. Guide slit scale bar work-depth setting
5. Adjustment knob for depth selection
6. Guide locking pins for work-depth setting (2x)
7. Connection point between hoisting arm and the scale bar for the work-depth setting (2x)
8. Guiding rods for the blade carriage (2x)
On these friction surfaces you must ensure there is lubricant between the rubbing parts in
order to reduce the resistance on the movement and prevent the elements wearing.
• Before applying new lubricant you must clean the friction surfaces.
• First spray the friction zones with a cleaning agent. Leave this to work for a few minutes.
ELIET recommends NOVATIO KLEENSPRAY-S.
• Wipe away old lubricant with a cloth or paper tissue.
• Once the friction zones are clean, new lubricant can be applied to the contact areas. Consult
the list of lubricants in “11.3. Lubricants” on page 60.
8
6
5
1
2
4
7
3
