73
English
For your information:
By grinding regularly, you will only have to grind away a
small bit of the metal to again obtain a sharp cutting edge. This will ensure very
short grinding times and you will always have the best possible cutting edge.
(ELIET recommends at least every 25 working hours).
Caution:
wear appropriate safety clothes when grinding the blades. Gloves,
hearing protection, and above all googles are mandatory.
• In order to grind the blade it must be taken off.
• The blade is attached to the blade holder in three places. The two side blades are attached with
two M10 bolts and the central blade with a single M10 bolt.
• Completely unscrew all the bolts (anti-clockwise). To do so use a ratchet and a size 17 ring wrench.
• Secure the blade in a vice.
• For grinding use an angled grinder, with a grinding disc that is suitable for steel.
• The blade has a cutting angle of 20°, and this angle must be main-
tained when grinding.
• Pass the grinder over the cutting edge. Grind away small layers in
several strokes until the cutting edge is sharp again.
A < B
