37
English
The level of operating stiffness can be adjusted by adapting the pressure of the brake pads on
the friction plate.
Account must be taken of the fact that, when working, the entire set of handlebars vibrate due
to the movements of the digging blade. It is therefore advised to set the Cruise Control in such
a way that it does not change position due to these vibrations. This means it is not necessary to
hold it all the time when working. This improves the operation of the machine.
• The following tools are required to adjust the brake pads: 1 ring wrench and 1 open-ended
wrench with wrench size 10 mm (1/2”).
• Each brake pad is mounted on a lever. These two levers are brought together by a bolt on which
a compression spring regulates the pressure on the brake pads
• By tightening the nut (in a clockwise direction) it is possible to increase the pressure and make
the mobility of the joystick lever more rigid.
• By slightly loosening the nut (in an anti-clockwise direction) it is possible to make the joystick
lever more mobile.
• If the pressure on the brake pads on the friction plate is removed entirely by making the nut so
loose that the compression spring has no more force, the joystick will spring back entirely to its
neutral position when you let go.
For your information:
the mobility setting of the joystick can be set to suit the
operator. He should set it to make it feel most comfortable during his work.
+
-
