EL2700 IP-Based Access Control System
User Manual
Revision 2.0
64
5.5.4
Inhibit Access
To view inhibit mode setting of all doors.
When “Inhibit Access” is set to “ON”, all valid card holders are
barred from entering.
For set this this setting can refer to;
At hardware 3.7.4.
At webserver 4.2.4.
5.5.5
Continuous Swipe
To view continuous swiping setting of doors
If “Continuous Swipe” is set to ON, it means that you are allowed
to swipe even when the door is open. If the setting is "NO", then
the reading is disabled until the door is closed.
For set this this setting can refer to;
At hardware 3.7.5.
At webserver 4.2.4.
