EL2700 IP-Based Access Control System
User Manual
Revision 2.0
34
Output1 TZ
Door 1
Output1 TZ [D1]
SUN: 00
Output2 TZ
Door 1
You can select from Door 1 to Door 4. Press “
B
” or “
C
” Key until
the desired door is displayed, then press <
#
>. The following
display appeared.
For example, to set the timers for Sunday to 01, we must key in
“01 <
#
>”. The display will now move to Monday. Continue to set
the desired timers until all eight days (Sunday through Saturday,
plus holiday). Note that if timers are not used for any day, the value
00
should be entered.
Repeat the procedures similar to that of door 1 to other doors.
3.9.2
Output 2 Time Zone
The Set Output Time Zone command allows you to program output
2 to be activated automatically according to timer settings.
On entry of this command, the LCD display will show: -
The procedures are similar to the setting of Output 2 Time Zone is
similar to Output 1 Time Zone. First set the timers for each day of
the week for Door 1 and then set the timers for Door 2, Door 3, and
Door 4.
