12
Descriptions
Function
①
Remote control signal receiver
Receives signal from remote control..
②
State LED
Shows power state in LED.
Green: power is on.
③
Wall bracket hole
Place bracket on it, and tight the bolts to assemble the cradle
and main body.
④
Serial cable port
Connects digital refractor and connected chart cable.
⑤
Power switch
A switch for power
It may run in about 8seconds after power on
⑥
USB port
Uses to connecting USB flash drive and supports 2 ports.
⑦
Adapter connector
Supplies power by connecting the adapter. Before the
connection, separate power cable and outlet.
[ Chart 1 ] Main body
