17
16
4. ASSEMBLY
The ELHO V-Twin rakes are generally delivered assembled and tested from the
factory. Therefore no assembly work should be needed. Just check that the machine
is delivered without transport damages.
It’s important to check the received machine compared to the order concerning the
equipment’s.
Check the pressure in the tires (1,6 bar) and the torque for the wheels (235Nm).
To lower the transport costs the wheels are often dismounted. Furthermore from the
torque it’s recommended to check the alignment of the steering axle according to the
picture below. The correct alignment is important to prevent unnecessary wear of the
tires.
The alignment setting is done with the rod end A as the picture show.
If the machine is not aligned with the tractor when driving straight forward use the
setting in rod end B to corrects this.
