17
16
Check that the rake tines are at least 5 cm free from
ground.
Check by rotating by hand, that the baskets are free
to rotate, and that no tines, tine bars or tine guides are
bent or damaged.
The basket wheel should rotate freely with a minimum
of noise.
Start the tractor and engage slowly oil to the baskets
(activate section for hose nr. 3). The baskets shall
rotate smoothly and with a constant speed.
Check and re-tension if necessary all bolts and nuts
after approximately two hours of use.
Particular important this is for the wheel bolts.
Bolt size M
(mm)
Bolt class 4.6
(Nm)
Bolt class 8.8
(Nm)
Bolt class 10.9
(Nm)
Bolt class 12.9
(Nm)
6
4,2
11
17
8
10
28
40
10
20
55
80
89
12
34
95
140
154
16
83
235
350
375
20
163
475
675
732
24
281
825
1170
1270
30
555
1630
2320
2500
Stop the tractor!!
Tightening torques
Do a check of all hex screws and nuts regularly, tighten them if necessary. If nothing
special is mentioned, use the tightening torques seen on the table below:
