11
5.2 Setting and Changing Register Values
Example:
A slowdown point of 20.0 mm needs to be entered.
Assuming that registers have been unlocked as above :
Press
R
Æ
The
Nr. window flashes
.
Press
1
Æ
1
flashes in
Nr. window
i.e. Register 01.
Press
>
Æ
The existing value of
R01
is displayed in the
target windows of
X
- and
Y
- axes, decimal point is extinguished.
Press
C
Æ
To reset the old value
Type in
200
Æ
The window shows 200 (i.e. 20.0 mm).
Press
E
Æ
The new value is saved now.
All windows are
0
and the decimal point is reinstated.
Any Register from 1 to 97 can be selected and changed in the above manner.
5.3 Locking of Registers
After editing the registers, it is necessary to relock the registers to avoid accidental
changes. There are 3 methods to do so.
1.
Access R98 and - instead of security code 250565
type in a “
0”
by the
C-
Button
Æ
Now press
R
-
9
-
8
-
>
-
C
–
E
2.
Activate the reset input
3.
Switch OFF the controller and ON after a few seconds.
