Elgin Pelican P, Operator'S Manual, Page: 74 / 112

BLEEDING FUEL SYSTEM
Air must be removed from the fuel system after the
system has been opened or the engine has run out
of fuel.
To bleed air from the fuel system, follow the direc-
tions in the operator’s manual supplied by the
engine manufacturer.
HYDRAULIC SYSTEM
The hydraulic system of the Pelican P is spline
shaft driven. There are no belts to break or pulleys
to adjust.
There are three basic hydraulic systems:
hydrostatic drive system
hydraulic sweep system
hydraulic steering system.
All three systems share a common hydraulic oil
tank with two filters (Figure SP-5). The tank is
located next to the engine on the right hand side of
the sweeper. With the hopper
down, check the oil
level at the sight gauge on the side of the tank.
SER
VICE
PROCEDURES
SP-8
Hydraulic Tank And Filters
Figure SP-5