Elgin Pelican P, Operator'S Manual, Page: 70 / 112

1. Remove the cover from the filter canister.
2. Remove and discard the outer element.
NOTICE
A dirty element should always be discarded, not
cleaned for further use. Cleaning an element voids
the warranty and makes the element less effective.
3. Visually check the rubber unloader valve, and
pinch the lips of the valve to remove any accu-
mulation of debris. If the unloader is damaged,
install a new unloader.
4. Clean the inside of the air cleaner canister
with a damp, lint-free cloth.
5. Install a new outer element.
6. Securely fasten the cover on the filter canister
with the unloader at the bottom. Make sure all
clamps are correctly fastened.
7. With the engine operating, check the air filter
restriction indicator. If the indicator stays off,
air cleaner service is complete. If the indicator
lights, go to step 8.
8. With the engine shut down, open the air
cleaner.
SER
VICE
PROCEDURES
SP-4
Air Cleaner Assembly
Figure SP-2