ELGi TRC 1000 MN UG, Owner'S Manual

Page: 23 / 81

23
The following chart gives the tightening for various fasteners used in the
compressor.
SI.
No.
Location Thread size
Tightening
torque Values are
in N-m
1. End cover Free-end M8 30 N-m
2. End cover Fly-end M8 30 N-m
3. Crankcase to base M12 50 N-m
4. Motor to base M12 50 N-m
5. Crankcase to Cylinder M12 50 N-m
6. Cylinder to head M12 50 N-m
7. Pipe flange joints M12 50 N-m
8. Pipe flange joints M10 30 N-m
9. Disc coupling bolt M8 33 N-m
10. Drain plug 3/8" BSP 30 N-m
11. Dipstick ½" BSP 35 N-m
Torque chart
Model : TRC 1000MN - UG