ELGi TRC 1000 MN UG, Owner'S Manual

Page: 13 / 81

13
d. Air leaks at the pipe joints and safety valve.
e. Clean the suction filter element thoroughly by using air from inside to
outside.
f. Check the suction and discharge operations and general performance of
the compressor.
g. Drain the intercooler and aftercooler.
NOTE :
RECOMMENDED GREASE
l
SERVOGEM Gr.3 FOR BHARAT BIJILI MOTOR
l
LITHIUM BASE Gr.3 FOR CROMPTION MOTOR
During IB schedule
a. All check points indicated under IA schedule to be carried out.
b. Breather valve should be dismantled, cleaned and checked for perfect
seating of the valve.
c. Check the safety valve setting.
d. Visually check the disc coupling for any abnormality in disc back
e. Check the oil level in the crankcase and topup the required quantity of oil
During IC, Schedule
a. All check points indicated under IA, schedule to be carried out.
b. Remove all the disc valves by removing the cylinder heads.
The valves are to be replaced with readily available spare valves since
valves that are removed should undergo thorough cleaning etc.
Maintenance Schedule