miniELCOR
90
To set this type of output it is possible only in case, that this output was already
configured in full mode display. Then is possible (in simple mode display) to switch
on or switch off by force of the button
Output pulses, binary
(see Fig. 47).
Fig. 47 Output pulses, switching on and off
15.3.2 Full mode display
In case that this output was not configured it is necessary to activate it and
assign a quantity (representing pulses). It is necessary to set technical parameters of
output pulses as well.
1. Output inserting into parameters
In left upper window choose item
Hardware
, press right mouse button ->
Insert
output measurand
->
Counter (pulses) output measurand
(Fig. 48).
Summary of Contents for miniELCOR
