Elgas miniELCOR, Operation Manual, Page: 59 / 131

miniELCOR
52
The Input parameters menu displays the following data:
•
Measuring pressure p
- pressure range
- serial no. of the pressure converter
•
Measuring temperature t
- measuring range
- serial no. of the temperature sensor
•
Impulse input V
- input clamps indication
- gas meter constant kp [imp/m3]
- gas meter serial no.
9.7 Parameter settings menu
One can set the selected device parameters in this menu directly from the
device keyboard. Setting the device parameters from the keyboard can be protected
by:
•
Service switch (the switch must be ON to allow writing)
•
Password
A max. of 10 passwords protecting this setting, including the employee code,
can be entered in the device. The password must be entered using the service SW
[23]. These passwords are valid only for setting parameters from keyboard and are
not related with the passwords described in 7.6.2. The password protection is turned
off if an empty list of passwords is entered in the device.
The following parameters can be set:
Service
parameters (*) - Station name
- Gas-day hour
Communication - Communication protocol
- Communication speed of serial interface
- Communication speed of IR head
- Network address
- Network address 2
Gas
composition - N2 concentration
- CO2 concentration
- Relative density
... (the parameters depend on the selected
calculation method)
Date/time
Totalizers 1 - kp Pulse weight (Gas meter const.) [imp/m3]
- V Primary volume
- Vs Spare primary volume
- Gasmeter SN
Archive reset Data archive
Daily archive
Monthly archive