operated, the connection with the panel will be established. The screen displays message "Talking".
The connection can take max. 255 seconds (about 4 minutes)
, and can be terminated earlier by
putting down the handset receiver.
3. When using ABCD numeration: using the keyboard, select flat number with which you want to
connect with the key "". If there is a literal extension for selecterd flat number (eg 10A, 10B, 10C),
after pressing "" key, letter selection screen appears (letters, and assigned keys). Pressing suitable
key establishes connection with handset.
Multi-entry system
In case of operation in the multi-entry system, establishing a connection takes place in the same way,
however it is possible only when no other talk is in progress from any other panel. Selection of flat when
connection is already established from other panel, displays the message "BUSY LINE". Message is
displayed until the end of connection or expiration of 45 seconds. However, should a user select handset
with which a talk is currently in progress, the following message will be displayed "PLEASE WAIT". At the
same time, sound signal will be generated in the handset receiver informing a tenant about an attempt to
establish connection from other panel. Should the tenant put down the receiver before expiration of 30
seconds, the connection will be established automatically.
4.4
Opening the electric lock
The electric lock can be opened:
§
after selecting user code on the entry panel - from the keyboard, select:
„ ”,”CODE" statement appears on the screen. Then enter: flat opening code, and
confirm by " " key. Eg 123, which code is 5678, select from the keyboard:
1235678 , for flat
No 3 with the assigned code 9876, this will be:
39876 ,
§
having approached the RFID tag in proper place on the entry panel – having approached the
wireless tag, electric lock automatically opens for a set, programmable period of time
§
having selected a general code on the entry panel (when “CODE" statement appears on the screen)
- entered code alone, without flat code, e.g. for code 1234 select
1234 ,
§
during the talking from the handset, after selecting door opening button. If the connection of the
panel with handset is not established, it is not possible to open the electric lock with the handset
opening button,
§
using additional button connected to KE input
Similarly, it is possible to activate additional relay if suitable settings allow that (see 5.3.3). It is only different
with the method of starting the relay with the codes. Knowing the individual code, to activate the relay:
§
after selecting user code on the entry panel - from the keyboard, select:
„
”, ”CODE" statement appears on the screen, then enter flat opening code + „
”,
e.g. for flat Np 43, which code is 8541, select from the keyboard:
438541 , for flat No 7
with the assigned code 6435, this will be:
76435 ,
Knowing the general code, to start the relay:
§
having selected a general code on the entry panel - entered code alone, without flat code, e.g. for
code 7523 select
7523 ,
Multi-entry system
7
See General settings / Talking options / Talking time
8
Applies to Optima SL255R, Optima SL255RC
17
Summary of Contents for OPTIMA SL255
Page 2: ...2...
