Page 10
www.elfo.com.pl
Manual operating of flash lamps FX PRO serie
There are two fuses type T4A (T6,3A in FX 1200 PRO) inside the socket. One of them
works and the other is spare part. User may replace the fuse by oneself on condition that the
lamp is separated from electricity. It is strongly recommended to aplly fuse compliant with
specification because of safety.
V.
Conditions of use
optimal work duration………… steady
portability…..………. carrying is allowed
VI.
Device class
Protection against electrical shock. Connection to electricity with earth electrode (PE) is
required.
VII.
Power supply connection
Disconnectable three-wire cable included.
VIII.
Housing
It is electric one and keeps away the user from touch of dangerous voltage, and protects
against highly dangerous increment of energy.
IX.
Accessibility
Operator access area………………………whole unit
Limited access………………………picture below
Flashtube replacement only
in authorized service!
Picture shows the most crucial unit area.
These elements are sensitive to shock
because of fragile, glass components.
There is also dangerous voltage too.
You must not look directly at the
uncovered flashtube when used!!!