www.elfinx.com
NOTE:
Please do not hit the shock sensor directly.
Antenna Position
The ideal position for the antenna is in the top corner of the front windscreen right up of the wheel side.
Please keep the antenna free from any obstructions to prevent reception interference.
NOTE:
If the vehicle is parked in urban area with many buildings around, or under a strong electric
field environment, the reception will be
affected.
13
Central Lock Installation Diagram
See wiring diagram
14
Central Lock Installation Guide
This system can control several common central lock systems without any additional parts.
Type A:
For vehicles equipped with central lock, first recommendation (FIG. 1)
Type B:
For vehicles equipped with central lock but no motor on driver’s side, add a master motor and rod into
the driver side door. (FIG. 2)
This type of installation is applicable to vehicles equipped with factory central lock unit such as some
Ford, Mitsubishi, Mazda, and Nissan models.
* INSTALLATION NOTE:
First, install the actuator near the door’s manual latch, and then fix the rod
of the actuator on the manual latch.
Type C:
For vehicles equipped with central lock and with motor on driver’s side. (FIG. 3)
Type D:
For vehicles equipped with electrical-activated vacuum-pump controlled door locks. (FIG. 4) The
timing of actuator mechanism can be set as 0.8 seconds or 3.5 seconds.
This type of installation is applicable for some Mercedes-Benz and Audi models.
Type E:
For some GM vehicles equipped with factory central lock unit. (FIG. 5)
Type F:
For some vehicles not mentioned above, please consult professional installers.
NOTE:
Type B installation method (FIG. 2) is suitable for most vehicles.
15
