background image

www.elfinx.com 

 

 

Remote  Control  Operation 

 

 

Active Pager Operations on Remote 

This 

DUAL-LINK

  paging  remote  keeps  you  in  control  with  instant  signals  and  actions  in 

response to events threatening your vehicle. 

Arming 

When all doors are closed, press    button to arm the vehicle and lock the doors.    The siren 
then chirps once and the lights flash once.    After about 8 seconds, the LED starts flashing.   

NOTE:   

In the event that the vehicle is bumped within 3 seconds just after the    button is 

pressed, the system will delay entering into arming mode until the bumping disappears.

 

Disarming 

Press    button to  disarm  the  vehicle and  unlock the  doors.    The siren  then  chirps twice, 
the lights flash twice, and the LED stops flashing. 

 

NOTE:   

If  the  siren  chirps  more  than  2  times, it  indicates  the  system  has  been  activated.   

Please refer to

 

section: System Operation - Alarm Memory Mode on for details.

 

NOTE:   

If no door is opened within approximately

 

25 seconds after disarming, the vehicle 

will automatically return to arming mode again.    Therefore, if you need to work for a longer 
time while the vehicle is in disarming mode, it is suggested to open any of the doors after 
disarming, thus suspend the auto re-arm function.

 

Turning Off Alarm Sound 

When  the  system  is  triggered,  press 

  button  to  turn  off  the  warning  sound  from  the 

remote control and the alarm sound from the vehicle.

 

Emergency Alert 

At  any  time,  press    of  the  remote  control,  the  siren  then  sounds  and  the  lights  flash  for 
about 25 seconds.    To turn it off, press    again.   

NOTE:   

This function can be used for car finding in a large parking lot.

 

                                                                              5 

 

     

Remote Control Operation 

 

Trunk Release 

Press    button to release trunk door.    The lights flash once. 

NOTE:   

This trunk release function is only applicable under the condition that 

the trunk door is not connected with other doors

 

NOTE:

    Pressing    button

 

will also disarm the vehicle.    If no door is opened 

within approximately

 

25 seconds after disarming, the vehicle will automatically 

return to arming mode again.    Therefore, if you need to work for a longer time 
while the vehicle is in disarming mode, it is suggested to open any of the doors 
after opening the trunk, thus suspend the auto re-arm function.

 

Silent Alarm Mode                                                                       

Turning ON the Silent Alarm Mode: 

Press 

  +    for 1 second, the speaker icon 

  is changed to

.    All chirp 

sounds  from  normal  operations  as  well  as  alarm  sounds  triggered  by  shock 
sensing will be turned off.    However, the alarm will still be active if any of the 
doors is opened or engine is started illegally. 

Turning OFF the Silent Alarm Mode: 

Summary of Contents for FM-298












Reviews: