www.elfinx.com
Press
+ for 1 second again, the speaker icon
returns.
Anti-Hijacking
If the vehicle is being hijacked, press
once, the siren keeps on and lights keep flashing. Then press
within 8 seconds, the siren then off but the lights keep flashing. Finally, press again within 3
seconds, the lights stop flashing. The Anti-Hijacking function is then activated. After 15 seconds,
the engine power will be cut off, the siren will back on and lights will flash. To cancel the function,
press
button.
NOTE
: The wirings must be connected correctly to achieve the Anti-Hijacking function.
6
Remote Control Operation
Temporary Mute Mode
When the system is triggered or calling for emergency help, the siren will blare. By pressing or
or
button, the siren can be turned off temporarily.
Automatic Arming Mode (Optional)
The system will remind the user to arm the vehicle by chirping the siren 5 times within 20 seconds.
After that period, the system will enter arming mode automatically without any remote operations.
INSTALLATION NOTE
: The jumper (JP) in the main unit must be in short circuit to facilitate this
function. If the JP is in open circuit, the automatic arming mode will be suspended. The system will
then give reminders to the user only.
Automatic Arming Mode ON/OFF Setting
Press + for 1 second, the icon appears indicating that Automatic Arming Mode is ON. To
cancel, press + for 1 second again. The default setting is OFF.
Remote Engine Start
Press button for 1 second, the remote chirps once and has the engine icon at “STOP”. Press
button for 1 second again within 5 seconds, the engine begins to start after being proper heated. After
that, the system will check the vehicle status, the remote will then report the vehicle status with music
sounds and engine icon at “RUNNING”. From then, the light will flash once every 5 seconds. This
state will keep on for 15 minutes after the engine is being started. During this period, the engine will
be cut off automatically if the
button is pressed for 1 second.
NOTE:
After the engine is started, open any of the doors and from then the user has 30 seconds to
insert the key or apply the foot-brake. If the user fail to do so, the engine will be cut off automatically.
NOTE:
Insert the key in the
KEY ON
position, not in the
START-MOTOR
position.
7
System Operation
Arming Protection
During the arming mode, the alarm will be triggered if any intrusive activity is detected. Any triggered
alarm status will be reported to the remote control for your instant action.
Automatic Re-Arming
If any of the doors is not opened within approximately
25 seconds after disarming, the doors will be
locked automatically and the vehicle returns to arming mode again.
