Page 6
Guardian Bridge Advanced User Manual
Reset to Factory Default
BY ELEXA
Resetting the Guardian Bridge
If needed, the Guardian Bridge can be reset locally by following these steps.
Only do this if your Z-Wave controller is missing or otherwise unreachable.
Beware that resetting your device will disconnect it from the system:
1. Make sure that your Guardian Bridge is powered on.
2. Press & Hold the button for 10 seconds.
3. The 1st LED will turn on and right after that, release the Button.
The Guardian Bridge memory will be erased to factory settings excluding
all Associations. This procedure also sends a Device Reset Locally to AG01
- Lifeline notification.
4. The 1st LED will start blinking in 500ms.
Reset to Factory Default
