Rev. 0
Rev. 0
page
28
page
5
Tire Pressure
6
If pneumatic tires are supplied, DO NOT use your wheelchair unless it has the proper tire pressure. DO
NOT over infl ate the tires. Failure to follow these suggestions may cause the tire to explode and cause
bodily harm.
4
Replacement of a pneumatic tire or tube MUST be performed by a PDG dealer.
Weight Training
6
PDG wheelchairs are
NOT
to be used as a weight training apparatus. PDG wheelchairs have NOT been
designed or tested as a seat for any kind of weight training. If the occupant uses said wheelchair as a
weight training apparatus, PDG shall
NOT
be liable for bodily injury and the warranty will be voided
immediately.
Weight and Age Limitations
The PDG Elevation wheelchair has a weight limitation of 250 pounds unless otherwise specifi ed by PDG.
Further, Elevation is not to be used by persons under the age of 12 years.
Safety/Handling of Wheelchairs
“Safety and Handling” of the wheelchair requires close attention from the wheelchair user as well as
the assistant. This manual points out the most common procedures and techniques involved in the
safe operation and maintenance of the wheelchair. It is important to practice and master these safe
techniques until you are comfortable maneuvering around frequently encountered architectural barriers.
Use this information only as a “basic” guide. The techniques that are discussed on the following pages
have been used successfully by many.
Individual wheelchair users often develop skills to deal with daily living activities that may diff er from
those described in this manual. PDG recognizes and encourages each individual to try what works best
in overcoming architectural obstacles that they may encounter. Techniques in this manual are a starting
point for the new wheelchair user and assistant with “safety” as the most important consideration for all.
Stability and Balance
To assure stability and proper operation of your wheelchair, you must at all times maintain proper
balance. Your wheelchair has been designed to remain upright and stable during normal daily activities as
long as you do not move beyond the center of gravity.
Virtually all activities which involve movement in the wheelchair have an eff ect on the center of gravity.
PDG recommends using postural support devices (lap belts) for additional safety while involved in
activities that shift your weight.
6
DO NOT lean forward out of the wheelchair so that your shoulders are any further than the front
of the rear wheels. Make sure the casters are pointing in the forward position whenever you lean
forward. This can be achieved by advancing the wheelchair and then reversing it in a straight line.
Coping with Everyday Obstacles
Coping with the irritation of everyday obstacles can be alleviated somewhat by learning how to manage
your wheelchair. Keep in mind your center of gravity to maintain stability/balance.
Real-Time Backrest Recline: Operating Instructions
Your Elevation has a unique backrest design that allows real time
adjustment. The backrest can be adjusted to suit the occupants
comfort by simply activating the adjustment lever located at the front
of the wheelchair, below the seat. Activation of the adjustment lever
will allow for movement of the backrest forward or back.
To recline back
1 Be sure the chair is on a solid, level surface and secure it using the
brakes.
2 Squeeze the lever on the LEFT side and lightly push back on the
backrest.
3 Release the lever at the desired positions.
See Figure 19.23 for location of the backrest recline adjustment lever.
To return back
1 Squeeze the lever on the left side.
2 Lean forward slowly and the back will return.
3 Release the lever to lock the back at the desired position.
4 Test the wheelchair for maneuverability.
Warning
— The backrest must be in its upright position prior to
changing seat height.
Warning
— Sudden or extreme reclining of the backrest will result in
tipping backwards of the wheelchair. The use of anti-tip devices is strongly recommended to avoid
accidents or injury.
Warning
— Do not bend or stretch the cables that run from the release lever to the backrest adjustment
mechanism, as this may release the mechanism and move the backrest resulting in accident or injury.
Figure 19.23
Backrest recline adjustment
lever.