manualshive.com logo in svg

Elevation DYNAMIC INUQUE, Owner'S Operation And Maintenance Manual, Page: 2 / 32

Share
Download
Elevation DYNAMIC INUQUE Owner'S Operation And Maintenance Manual Download Page 2

Rev. 0

Rev. 0

page

 31

page

 2

WARNING

Do not operate this equipment without first reading and understanding this manual. If you are unable to 
understand the warnings and instructions, contact a health care professional such as a doctor or therapist 
who is familiar with this type of product before attempting to use this equipment. Otherwise, injury or 
damage may result.
Refer to this manual regularly for maximum safety and performance.

DEVICE DESCRIPTION 

The PDG Product Design Group, Inc. Elevation Manual Wheelchair is a manually operated, user propelled 
wheelchair. Its intended function and use is to provide mobility to persons limited to a seated position. It 
is an ultra-light, rigid (non-folding frame) type wheelchair.
The device consists primarily of a lower frame assembly, a seat sling, a back rest, and back upholstery, 
large rear wheels with hand rims for self-propelling the chair and front swivel type pivoting casters for 
turning.
Designed to enable greater function, independence, and comfort, the Elevation wheelchair promotes 
activities of daily living. Its seat height and backrest recline angle adjustment capabilities allow the user 
to self-adjust their sitting posture to best suit their current activity. The Elevation is capable of up to 10 
inches of on-the-fly seat height/dump adjustment and 30° of back recline.

TABLE OF CONTENTS

1  Special Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2  Safety Summary. . . . . . . . . . . . . . . . . . . . . . . . . 3
3  Tilting – Curbs. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 Stairways. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Escalators  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6  Transferring to and From Other Seats  . . . . 7
7  Percentage of Weight Distribution  . . . . . . . 7
8  Functional Reach from Wheelchair  . . . . . . . 7
9  Reaching, Leaning and Bending Forward . 8
10  Dressing or Changing Clothes. . . . . . . . . . . . 8
11  Environmental Conditions  . . . . . . . . . . . . . . . 8
12  Components & Options Warnings . . . . . . . . 9
13  Standard Features  . . . . . . . . . . . . . . . . . . . . . . 12

14 Unpacking  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
15  Out Of The Box Instructions. . . . . . . . . . . . . 13
16  Safety Inspection Checklist  . . . . . . . . . . . . . 13
17 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 15
18 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
19  Set UP & Adjustments  . . . . . . . . . . . . . . . . . . 16
20   Contacting Your Supplier to 

Obtain Service  . . . . . . . . . . . . . . . . . . . . . . . . . 29

21   Damage Requiring Service by 

Qualified Service Agent. . . . . . . . . . . . . . . . . 29

22  ISO Test Information Disclosure  . . . . . . . . . 30
23  Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . 31

23 LIMITED WARRANTY

PLEASE NOTE

 — THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW 

APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of our products.
This warranty gives you specific legal rights and you may also have other legal rights, which vary from 
state to state.
PDG warrants its product, except for the seat cushion (which is not warranted), to be free from defects in 
materials and workmanship for a period of one (1) year from date of purchase. The side frames and cross-
members are warranted for the lifetime of the original purchaser/user. If within such warranty period any 
such product shall be proven to be defective, such product shall be repaired or replaced, at PDG’s option. 
This warranty does not include any labor or shipping charges incurred in replacement part installation or 
repair of any such product. PDG’s sole obligation and your exclusive remedy under this warranty shall be 
limited to such repair and/or replacement.
For warranty service, please contact the Dealer from whom you purchased your PDG product. In the 
event you do not receive satisfactory warranty service, please write directly to PDG at the address on the 
back cover page, provide Dealer’s name, address, and date of purchase, indicate nature of the defect and, 
if the product is serialized, indicate the serial number. Do not return products to our factory without our 
prior consent.
Limitations and exclusions: the foregoing warranty shall not apply to serial numbered products if the 
serial number has been removed or defaced, products subjected to negligence, accident, improper 
operation, maintenance or storage, products modified without PDG’s express written consent including, 
but not limited to, modification through the use of unauthorized parts or attachments; products 
damaged by reason of repairs made to any component without the specific consent of PDG, or to a 
product damaged by circumstances beyond PDG’s control, and such evaluation will be solely determined 
by PDG. The warranty shall not apply to problems arising from normal wear or failure to adhere to these 
instructions. The foregoing express warranty is exclusive and in lieu of any other warranties whatsoever, 
whether express or implied, including the implied warranties of merchantability and fitness for a 
particular purpose, and the sole remedy for violations of any warranty whatsoever, shall be limited to 
repair or replacement of the defective product pursuant to the terms contained herein. The application of 
any implied warranty whatsoever shall not extend beyond the duration of the express warranty provided 
herein. The manufacturer shall not be liable for any consequential or incidental damages whatsoever.
This warranty shall be extended to comply with state/provincial laws and requirements.

Serial Number

Summary of Contents for DYNAMIC INUQUE

































Reviews:

No comments