Elettrotest TPS/M/D, User Manual

Page: 40 / 42

40
USER MANUAL TPS/M/D 62000447 REV 00_ – 31/08/2021
5. TABLE OF THE DATA SAVED ON THE USB
Item Name Description
1 Standby/Ready/Failure 0= Standby, 1= Ready, 2= Failure,
2 Output 0=OFF, 1=ON
3 Output mode DC 0 = AC, 1= DC
4 Output mode mono-phase 0 = 1PH, 1= 3PH
5 4-wire sense 0 = 2 wire 1 = 4 wire
6 Voltage setpoint L1 Set voltage of L1 [V]
7 Voltage setpoint L2 Set voltage of L2 [V]
8 Voltage setpoint L3 Set voltage of L3 [V]
9 Voltage setpoint ALL Set voltage of all the phase together [V]
10 Frequency setpoint Set frequency for all the phases [Hz]
11 Phase setpoint L1 Set phase of L1[deg]
12 Phase setpoint L2 Set phase of L2[deg]
13 Phase setpoint L3 Set phase of L3[deg]
14 Voltage output L1 Measured output voltage of L1 [V]
15 Voltage output L2 Measured output voltage of L2 [V]
16 Voltage output L3 Measured output voltage of L3 [V]
17 Current output L1 Measured output current of L1 [A]
18 Current output L2 Measured output current of L2 [A]
19 Current output L3 Measured output current of L3 [A]
20 Fail L1 0 = no blocking alarm, 1= blocking alarm
21 Fail L2 0 = no blocking alarm, 1= blocking alarm
22 Fail L3 0 = no blocking alarm, 1= blocking alarm
23 Alarms L1 Alarm of the L1 line
24 Alarms L2 Alarm of the L2 line
25 Alarms L3 Alarm of the L3 line
26 Uptime [day] The number of days from the turn on
27 Uptime [hour] The number of hours from the turn on
28 Uptime [min] The number of minutes from the turn on
29 Uptime [sec] The number of seconds from the turn on
30 Running [day]
The number of days with the output active from the last
turn on of the machine
31 Running [hour]
The number of hours with the output active from the
last turn on of the machine
32 Running [min]
The number of minutes with the output active from
the last turn on of the machine
33 Running [sec]
The number of seconds with the output active from the
last turn on of the machine