Elettrotest TPS/M/D, User Manual

Page: 16 / 42

16
USER MANUAL TPS/M 62000595 REV 03_ – 01/06/2021
2. INSTALLATION
2.1. GENERAL NOTES
2.1.1. INSPECTION
After unpacking the product, please inspect any damage that may have occurred during the
shipment. Save all packing materials in case the product has to be returned one day. If any
damage is found, please file a claim with the carrier immediately. Do not return the product to the
factory without obtaining the prior Return Merchandise Authorization (RMA) acceptance from
ELETTROTEST S.P.A.
2.1.2. POWER CABLING
2.1.2.1.1. TPS/M/D 1K5
•
Use the cable supplied with the machine.
•
Pay attention to the polarity of the cable.
•
Make sure that the phases are connected with the indicate sequence
othewise you canhave an alarm.
•
Connect cable load with appropriate dimension and p
ut the ferrite
core on the load cable with 3 turns close to TPS/M/D
•
Optionally: Connect the sense wires
•
Keep free under and lateral area for ventilation
9
3
2
7
6
4
10
1. 4 wire sense voltage
2. Power output
3. GND
4. Safety Switch
5. Input supply
6. Input fuse
7. Input switch
8. Comunication port
9. Fan
10.
Ventilation grill
8
1
4
5