Elesa CE.99951, Operating Instruction

Page: 8 / 24

8
EN
MPI-R10 Magnetic measuring system
Models all rights reserved in accordance with the law.
Always mention the source when reproducing our drawings.
4. Switching on the system
After you have read and understood the section “Safety Instructions”, proceed by
switching on the indicator.
To switch the indicator on:
- hold the key
mm-inch
;
- press the key
SET
.
The display will light up and the indicator is ready to be used.
4.1 Switching off the system (only for storage)
To switch the system off:
- enter the programming mode;
- select
rESEt
(see cap. 8.3);
- press
SET
;
- press
ABS-REL
;
- press
mm-inch
.
The display will turn off and the indicator will go into low power mode.
5. Display
1. Absolute / incremental mode
2. Battery
3. Unit of measure (mm / inch / degrees)
4. Target position indications
1 2 3 4