elero MemoTec-868 Operating Instructions Manual Download Page 7

Deleting radio channel settings

GB-12

Intermediate position 
Roller shutter/venetian blind

GB-11

Adjustment Pos 

B

Prerequisite:

The transmitter has been programmed.

1. Press the 

DOWN

button twice 

in quick succession

.

2. The drive will adjust the shutter curtain/venetian blind into the

stored intermediate position. If no intermediate position is
stored, the shutter curtain/venetian blind is automatically
adjusted into the lower limit position.

Adjustment Pos 

V

(roller shutter)

Prerequisite:

The transmitter has been programmed.

1. Press the 

UP

button twice 

in quick succession

.

2. The shutter curtain is adjusted into the stored ventilation

position. If no ventilation position is stored, the curtain is
automatically adjusted into the upper limit position.

Adjustment Pos 

V

(venetian blind)

Prerequisite:

The transmitter has been programmed.

1. Press the 

UP

button twice 

in quick succession

.

2. The blind is adjusted into the stored reverse position. If no

reverse position is stored, the blind is automatically adjusted
into the lower limit position.

Deleting Pos 

B

1. Press the following buttons 

simultaneously

:

• 

DOWN 

button

• 

STOP

button

2. Keep these two buttons pressed until the LED goes out briefly.

Deleting Pos 

V

1. Press the following buttons 

simultaneously

:

• 

UP 

button

• 

STOP

button

2. Keep these two buttons pressed until the LED goes out briefly.

Deleting individual transmitters

Disconnect the fuse – and reconnect after a few seconds.

1. Press the following buttons 

simultaneously

:

• Programming button 

P

(on back of device)

• 

STOP

button (on front of device)

2. Keep these two buttons pressed until the LED goes out briefly.

Deleting all transmitters

Disconnect the fuse – and reconnect after a few seconds.

1. Press the following buttons 

simultaneously

:

• Programming button 

P

(on back of device)

• 

UP

button

• 

STOP

button

• 

DOWN

button

2. Keep these buttons pressed until the LED goes out briefly.

GB

(on front of device)

k

Summary of Contents for MemoTec-868











Reviews: