elero MemoTec-868, Operating Instructions Manual

Page: 5 / 10

Programming radio channel settings
GB-8
24 hr button
The 24-hour button can be used to programme one UP and one
DOWN command. These commands are then automatically
executed every 24 hours.
Week button
The week button can be used to programme one UP and one
DOWN control command for each week day. These switching
commands are then automatically executed every day and
repeated every 7 days. If weekly control commands have been
programmed, no daily control commands are executed.
GB
Explanation of functions
GB-7
Function menu
Manual operation functions
• UP, STOP, DOWN
• Intermediate position
• Ventilation/reverse position
Automatic operation functions
When the system is in automatic mode, programmed control
commands are executed.
• UP, STOP, DOWN
• Intermediate position
• Ventilation/reverse position
• Daily/weekly switching times (max. 2 control commands per
day)
Programming radio channel settings
Programming transmitter/channel
Prerequisite: The drive must be installed.
1. With pre-installed receivers, the fuse must be disconnected
and reconnected after a few seconds.
The receiver will then remain in programming mode for
approximately 5 minutes.
2.Position yourself in front of the roller shutter/blind with the
MemoTec-868 in your hand.
LR03 (AAA)
- -
Programming button P
3. Press programming button P
auf on the back of the device
briefly. The shutter/blind will
start to move up and down.
This will happen for approxi-
mately 2 minutes.
4. To define the keyboard layout, press the UP button on the
MemoTec-868 as soon as the shutter/blind begins to move
upwards (after approx. 1 second).
The shutter/blind will come to a halt briefly.
As soon as the shutter/blind begins to move again, press the
DOWN button on the MemoTec-868.
The shutter/blind will come to a stop.
The MemoTec-868 has been successfully programmed.