elero Insolis 4, Operating Instructions Manual

Page: 11 / 27

9
Safety
EN
2.3 General duties of the operator
❏
The operator is obliged to only operate the device in a good and operatio-
nally safe working condition. He must ensure that, in addition to the safety
notices in the Assembly Manual, the generally accepted safety and accident
prevention regulations, the specifications of DIN VDE 0100 and the provisi -
ons on environment protection in the respective country of application, are
observed and complied with.
❏
The operator is responsible that all work with the device is performed by
trained and authorised personnel who have received the appropriate safety
instructions.
❏
Ultimately responsible for accident-free operation is the operator of the
device or the personnel authorised by the operator.
❏
The operator is responsible for compliance with technical specifications, in
particular for the compliance with static loads.
Non-compliance of static loads may cause loss of the support or hol-
ding function.
2.4 Requirements of the personnel
❏
Each person who is commissioned to work with the device must read and
understand the Assembly Manual in its entirety before he/she carries out
the respective work. This also applies if the assigned person has previously
worked on such a device or was trained to do so.
❏
All work on the device must only be performed by trained and authorised
personnel who have received the appropriate safety instructions. Before
starting any operations, personnel must be made aware of the hazards
involved in handling the device.
❏
All persons must only perform work according to their qualifications. The
areas of responsibility of the respective personnel must be clearly specified.
❏
Any personnel who have been commissioned to work with the device must
have no physical limitations, limitations on attention or judgement, whether
temporary or permanent (e.g. due to overtiredness).
❏
Minors or persons who are under the influence of alcohol, drugs or medica -
tion, are prohibited from working with the device, as well as performing all
assembly, disassembly and cleaning work.
❏
Personnel must wear the suitable personal protective gear appropriate to
the work and present work environments.