8 | EN
Warnhinweise
Combio-868 RM /-915
EN | 9
Combio-868 RM /-915 for tubular motors
The Combio-868 /-915 is suitable for the use with tubular motors
for roller shutters and sun protection systems.
If a command is sent, the receiver immediately activates the
self-locking operating mode.
The hand-held transmitter can be used to program an intermediate
position.
For sun protection systems it is possible to additionally program a
fabric tautening and a ventilation position for roller shutters
(→ refer to the transmitter instructions).
Connection and installation
Combio-868 JA /-915 for venetian blind drives
1. Put the drive into operation with the installation cable and
set the upper and lower limit switch.
2. Move the hangings with the installation cable to an
intermediate position.
3. Switch off the mains voltage.
4. Unplug the installation cable.
5. Connect the female Hirschmann-plug of the radio receiver
with the drive plug.
6. Connect the Hirschmann-plug of the radio receiver with the
female plug of the mains cable.
Combio-868
PE
L
N
1~
M
JA /-915
1
2
3
1 2 3
Antenna
Mains
230 V/50 Hz
7. Fix the radio receiver.
8. Switch the mains voltage on again.
9. Programme the transmitter
(→ refer to the transmitter instructions).