6 | EN
Warnhinweise
Mounting options
EN | 7
Combio-868 JA /-915
Combio-868 JA /-915 for venetian blind drives
The Combio-868 JA /-915 is suitable for the use with venetian
blind drives.
In order to carry out an exact slat tilting, the Combio-868 JA /-915
has a dead-man operating mode. If the button on the hand-held
trans mitter is pressed until the LED goes out, the receiver acti-
vates the self-locking operating mode.
The handheld transmitter can be used to save an intermediate
position and tilting position for the slats (→ refer to the transmitter
instructions).
Mounting options
Combio-868 JA /-915
1. Put the Combio-868 /-915 into the
mounting clamp.
2. Fix the Combio-868 JA
/-915 + clamp to the
inside or outside of the
channel.
Mounting options
Combio-868 RM /-915
1. Stick the enclosed adhesive strip onto the
Combio-868 RM /-915.
2. Fix the Combio at an appropriate position.
Combio
with clip
Combio with
clip inner
Combio with
clip outer