Contents
2 | EN
Warnhinweise
Safety tips
EN | 3
Safety tips
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Use in accordance with the regulations
. . . . . . . . . . . . . . . . . . . . . . 4
Optimal use of the radio signal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting options
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Combio-868 JA /-915 for venetian blind drives . . . . . . . . 7
Combio-868 RM /-915 for tubular motors . . . . . . . . . . . . . 8
Connection and installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Combio-868 JA /-915 for venetian blind drives . . . . . . . . 9
The Combio-868 RM /-915 for elero tubular motors
with plug-in cable (limit switch drive) . . . . . . . . . . . . . . . . . . 10
Combio-868 RM /-915 for tubular motors with
plug-in cable (ACS-E electronic drive) . . . . . . . . . . . . . . . . 11
Combio-868 RM /-915 for tubular motors
with fixed cable (limit switch drive) . . . . . . . . . . . . . . . . . . . . 12
Combio-868 RM /-915 for elero tubular motors
with fixed cable (CSM-E electronic drive)
for textile sun protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Technical data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tips for finding faults
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Important safety indications!
Observe the following Instructions.
Danger of injury due to electric shocks.
Connections to the mains supply
must
be car-
ried out by authorized, specialized personnel.
• Check the installations regularly for wear and
tear or damage.
• The regulations stipulated by the local power
supply company should be observed during
connection work, as well as the regulations for
wet and damp areas in accordance with
VDE 0100.
• Observe country-specific regulations.
• Only use unaltered
elero
original parts.
• Ensure that nobody is within the vicinity of the
installation until it is brought to a standstill.
• When carrying out work on the installation
(e.g. maintenance), always disconnect the
installation from the mains supply.
• Keep children away from controls.
• After installation, the control unit must not be
exposed to rain.
Warning!