USA-10
USA-9
US
A
Explanation of functions
+/- buttons
The following operations are possible using the + and - buttons:
MENU button
By pressing the
MENU
button, you can see an overview of the
menu or the operating mode.
The values currently displayed are
not
saved.
RESET button
When the
RESET
button is pressed (with a ballpoint pen or
similar object), the AstroTec reverts to the default setting.
Exceptions:
Function, language and city menu levels.
Time/date
TIME/DATE
This menu is used to set the time and the date.
• Menu
W
change value
• Auto
mode
W
request information
• +
button
W
next automatic switching time
v
• –
button
W
next automatic switching time
b
+
button and
OK
button
W
astro time
v
–
button and
OK
button
W
astro time
b
Light sensors/Explanation of functions
Light sensors
Note:
If you wish to connect a light sensor to the AstroTec 868, the
instructions provided with the light sensor must be followed.
Explanation of functions
MAN/AUTO sliding switch
In the “
MAN
” sliding switch setting, only manual command
controls are executed.
In the “
AUTO
” sliding switch setting, manual and automatic
command controls are carried out (e.g. shade function, time, astro
function,...)
Transmission control light
A radio signal is indicated when the transmission control light
comes on.
If the
UP
,
STOP
and
DOWN
buttons or programming button
P
on the
transmitter are held for a longer period, the transmission control
light will go out after 3, 6 and 9 seconds. This function is a counting
aid. After 12 seconds the transmission control light will go out
completely.
If the batteries are low, the transmission control light flashes during
the transmission process. The transmitter power and/or radio range
is reduced when the batteries are low. If the transmission control
light no longer lights up when a button is pressed, the batteries
have to be replaced.
Operating mode
The time is shown in the display.
OK button
When the
OK
button is pressed, the values currently displayed are
saved.
