Elenberg DVDP-2410, User Manual

Page: 37 / 38

TROUBLESHOOTING
Symptom Cause(s) Remedy
No power The power cord isn’t con-
nected
Connect the power cord
properly
No picture TV video setup isn’t cor-
rect
Select the suitable setup
The setup mismatch the
real connection
Press [V-MODE] until the
picture appear again
Video cable isn’t con-
nected well
Connect the cable properly
No sound Audio cable isn’t con-
nected well
Connect the cable properly
Power off for the con-
nected equipment
Turn on power
Audio setup isn’t correct Select the suitable audio
setup
Distorted picture Dirty disc Clean the disc
In fast forward or fast re-
wind mode
Sometimes the tiny distor-
tion appears. It’s normaly
Luminance un-
steady or picture
with noise
Anti-copy circuit influ-
ence
Connect the DVD unit to TV
directly
Unable to play Without disc Put in the disc
Disc is bad Clean or replace the disc
Disk is put upside down Put the disc properly
Dirty disc Clean the disc
There are menu on TV
screen
Use SETUP to turn off
menu
Perental control is work-
ing
Set up parental off or
change the setup
Key malfunction Power wave or other stat-
ic interference
Turn on/off the power and
try again
Remote control
doesn’t work
Remote control isn’t
pointed at the sensor
Point the remote control at
the sensor
Remote control is too far
from DVD unit
Operate the remote control
within 7m
Batteries are exhausted Replace the batteries
37