User Manual / NDA 100/3 TH(S) RG L20 230AC(PoE) LAN
15
Subnet mask
Shows factory default Subnet mask of connected display.
Enter new Subnet mask according to your LAN.
Gateway address
Shows factory default Gateway address of connected display.
Enter new Gateway address according to your LAN.
TCP/IP port for MODBUS
Shows
MODBUS
TCP/IP
port.
Enter new MODBUS TCP/IP port according to your LAN.
Default factory value is
502
.
TCP/IP port for factory services
Shows TCP/IP port for factory services.
Enter new TCP/IP port for factory services according to your LAN.
Default factory value is
10001
.
Sensor No. 1 settings
This menu allows user to configure the type of sensor used and its parameters.
Sensor No.1 connection
Internal, RS-485, Ethernet, MODBUS slave, None
Select what type of sensor is paired with display.
Internal – display is equipped with plug-in internal sensor.
RS485 – external sensor is attached to display via cable.
Ethernet – LAN type sensor is paired with display.
MODBUS slave – LED display is used as a displaying unit for a control system
(e.g. PC, PLC, etc.), which sends it’s temperature and humidity data.
None – no sensor is connected
Sensor No. 1 ID
Sensor No. 1 ID number or MODBUS slave address.
If MODBUS TCP/IP External Sensor is Connected
Sensor No. 1 IP address
IP address of sensor No. 1, if
Sensor No. 1 connection:
is set to Ethernet.
Sensor No. 1 TCP/IP port
TCP/IP port number of sensor No. 1, if Sensor No. 1 connection: is set to Ethernet.
Default: 502. (MODBUS standard default.)
If MODBUS RS485 External Sensor is Connected
Baud Rate
1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200
Baud rate for sensor No. 1, if Sensor No. 1 connection: is set to RS-485.
Default: 19200. (MODBUS standard default.)
Parity
None, Even, Odd
Parity type of sensor No. 1, if Sensor No. 1 connection: is set to RS-485.
Default: EVEN. (MODBUS standard default.)
Baud rate and Parity of sensor No. 1 and No. 2 have the same settings because they are on the same RS485 bus.
