User Manual / NDA 100/3 TH(S) RG L20 230AC(PoE) LAN
7
LAN Interface Connector – P9
Ethernet 10/100 RJ45 shielded connector is used.
Connector view
Signal
Direction
Connector RJ45 view to hole
1
TX+
output
2
TX-
output
3
RX+
input
4
NC (LAN), +Vdc (PoE)
5
NC (LAN), +Vdc (PoE)
6
RX-
input
7
NC (LAN), -Vdc (PoE)
8
NC (LAN), -Vdc (PoE)
shield
The IP address, SubNet Mask and Gateway of display have been programed at factory. These values are
printed on a label located on the back side of display.
Factory default IP address is 192.168.0.69.
You can change the factory set IP address, Subnet mask and Gateway via web browser as described
later in this manual.
Details of Cable Connections
pin 1
pin 2
pin 3
pin 4
pin 5
pin 6
pin 7
pin 8
Screws 2x
Power cord