esca User’s Manual v1.2
F
RONT
C
ONNECTIONS
On the front of ESCA there is the connection for your Device Under Test (DUT).
This connector is a coaxial SMB male gold plated connector where the center contact is
the current measurement input and the outer contact is the reference voltage.
IMPORTANT: Do NOT short the reference to the ground.
R
EAR
C
ONNECTIONS
On the rear of ESCA there are two connectors:
-
mini-B female USB connector to connect to the PC through the included USB
cable;
-
2mm gold plated ground female connector for connecting the ESCA ground
to a Faraday cage;
T
IPICAL
E
XPERIMENTAL
S
ETUP
This picture shows how to correctly connect ESCA in a typical electrophysiology setup:
USB
Ground
LED
Reference
Input
