background image

18/

18

WARRANTY

Ocean Rock USA LLC doing business as Elementi, warrants Elementi fire features and

accessories to be free from defects in parts and workmanship under normal use and service for

a period of 1 year from the date of purchase. In the event of such defects Elementi will, at its

option, repair or replace the defective product. The foregoing is at the discretion of Elementi.

There will be no charge for the replacement parts or product, however it will be the consumer’s

responsibility to return the product to the original place of purchase.

Elementi will not be responsible for consequential damages in excess of the purchase price of

the product on which such liability is based and the warranty does not cover costs including

freight, removal and reinstallation.

This warranty is non-transferable and applies only for units that are for non-commercial

personal use only.

Under this warranty agreement, all gas lines must be installed by a licensed gas fitter.

Damage caused by shipping, staining and abuse are not covered under this warranty. Dings,

dents and scratches, fading and natural weathering are not covered under this warranty.

Decorative rock is not covered under this warranty. Improper installations, repair or modifications

made by anyone other than Elementi or its authorized agents will void this warranty and any

damage caused by such is also not covered under this warranty.

Minor chipping, weather fading, water staining and non-structural hairline cracks are typical of

the material of this product and are not covered under this warranty. Some color and texture

variation is typical of the material and finish for this product and is not covered under this warranty.

Ocean Rock USA LLC

1300W. 9th ST, Upland, CA 91786

www.elementifire.com

Summary of Contents for OFE102-NP



















Reviews: